DoctorMark Dewsbury

Senior Lecturer in Architecture

Architecture and Design

  • Senior Lecturer in Architecture
    Architecture and Design
  • +61 3 6324 4471 (Work)
  • +61 3 6324 4477 (Fax)
  • School of Architecture and Design, Architecture and Design, IC221 Architecture Building, Inveresk Campus, TAS

RESEARCH SUMMARy

Transient hygrothermal analysis (1D and 2D).
Building envelope and systems design to mitigate condensation and mould.
Architectural Science
Building Physics
Energy Efficiency
House Energy Rating (HER) / Building Energy Rating (BER)
Net Zero Buildings
Solar Passive Design
Thermal Mass
Environmentally Sustainable Design and Construction
Design and construction of thermal performance test buildings and houses
Design and implementation of environmental measuring equipment within test buildings and residential houses
Empirical validation research examining the thermal performance of buildings and the relative correlation to results from detailed building simulation programs
Detailed simulation of buildings for assessment of heating and cooling energy, water consumption, waste water management, electric lighting, embodied energy and carbon sequestration.

Research Themes
Mark's research aligns to the University's Resources and Sustainability and Better Health research themes. His research on the design, construction, operation and simulation of buildings with an aim to reduce the energy inputs and carbon costs at each level is heavily weighted towards the Resources and Sustainability theme area. However, better buildings can also provide a significantly healthier home and workplace. This may be through a more thermally comfortable building, which impacts on blood and respiratory disorders or other built fabric factors. This link between building design and construction and Better Health has been pointedly developed in Mark's recent industry and government collaborative research on interstitial condensation and mould within buildings in most Australian jurisdictions and its possible association with human health.

Collaboration
Mark's hygrothermal, empirical validation and building thermal performance research has included in-kind, cash and technical collaboration from Fraunhofer Institute of Building Physics, CSIRO, Department of Industry, Department of Justice Tasmania (Consumer, Building and Occupational Standards), Forest and Wood Products Australia, Aurora Energy, CSR building products, Kingspan, and Daikin.

Current projects
VBA 1: (2021-2026) This project has delved deeply into the transient hygrothermal analyses of 'code-compliant' typical residential low-rise timber-framed external wall systems and their propensity to support or mitigate mould growth within local area climates of Victoria. This research has been funded by the Victorian Building Authority, CSIRO, Master Builders Association Victoria, and Wood Solutions, with collaboration from the Fraunhofer Institute of Building Physics. The research has comprised four significant stages, namely; (1) an assessment of 6-Star external wall systems, (2) an assessment of 7-Star external wall systems, (3) An exploration of methods to improve 6-Star and 7-Star external wall systems to maintain and simulated Mould Index of <1 and <3, and (4) a funded PhD activity exploring the impact of intermittent conditioning on Hygrothermal (condensation and mould growth) simulation results.

CBOS 4.1 (2022-2024) This project is building on previous research activities funded by the Tasmania Government, with collaboration from the Fraunhofer Institute of Building Physics. This project is exploring the hygrothermal (condensation and mould growth) risks associated with typical residential low-rise timber-framed dwellings and the adoption of the 7-Star Energy Efficiency regulations, within local area climates of Tasmania. The research comprises three significant stages, namely; (1) establishing of the is a condensation or mould growth risk for typical 7-Star timber-framed floor, external wall and roof systems, (2) exploring material choices and construction methods to mitigate moisture and mould risks, and (3) providing content for the 3rd Edition of the Tasmanian Condensation Designers Guide.

ARC Advance Timber Hub (2023-2028). The Industry Transformation Hub includes eight project areas. Mark is the Node 2 leader, which focuses on the human experience and includes three project areas, namely; (1) The hygrothermal design of mid-rise timber framed external wall systems, (2) Biophylia in mid-rise timber buildings, and (3) Acoustics of long-span timber flooring systems. Project partners include University of Queensland, Iniversity of Sydney, QDAF, AURECON, ARUP, Rothoblaas, and Lendlease.

NIPP Valley Workshop (Hygrothermal). This prooject is exploring advanced residential prefabricated envelope systems utilising engineered wood products sourced from lower grade forest resources. Current building regulation frameworks and conventions have favoured the use of solid timber building techniques originating from the 1830’s and stifled innovation. These methods are increasingly unsustainable and inefficient. The development of refined building envelope systems that address critical hygrothermal principles is essential for the provision of high-performance buildings that not only lead to better construction efficiency and resource utilisation but address the need for net zero and low carbon intensity durable and healthy buildings.  
The purpose of the research is to develop prefabricated residential construction systems that utilise engineered wood products derived from lower grade forest resources. This has the potential to increase carbon sequestration, reduce embodied energy, improve building airtightness, and increase envelope thermal efficiency. This will significantly reduce the need for the limited high quality solid wood resource, and through process design reduce costs through prefabrication system efficiencies.
The advance toward the 2050 net zero goals requires the design and construction sectors to manage resource depletion, reduce operational energy use, provide better efficiencies to reduce construction costs and reduce the embodied energy required to make buildings.
The purpose of this research is to develop and test new forms of prefabricated building envelope systems derived from sheet formed engineered wood products. This process is needed to establish and document structural and hygrothermal alternatives to traditional forms of low-rise timber construction. This approach recognises, translates, adapts, and builds on the learned experiences of other developed nations that have identified the need for the co-design of structure, system assemblage and hygrothermal interactions.  
This project will establish a new suite of methods to utilise existing materials manufactured from lower-grade forest resources and support the construction of low-rise buildings. This will provide better wood fibre utilisation and a new generation of design and construction typologies.  

NIPP Valley Workshop (Structural): This project is exploring advanced structural systems for prefabricated residential building envelopes utilising engineered wood products sourced from low-grade forest resources. 

Current building regulatory frameworks for low-rise residential buildings favour the use of solid timber building techniques that originate from the 1830’s and the traditional building approval systems innovation. These methods are increasingly unsustainable and inefficient. The development of refined low-rise timber fibre-based structural systems that incorporate modern prefabrication methods will lead to better construction efficiency and resource utilisation.

The purpose of the research is to explore, develop and evaluate structural solutions for prefabricated residential building envelope construction systems that utilise engineered wood products derived from low-grade forest resources. As a component of Australia’s net-zero targets, this project has the potential to increase carbon sequestration, reduce embodied energy, improve building airtightness, and increase building envelope thermal efficiency. This will significantly reduce the need for the limited high-quality solid-wood resource, and through the redesign of the fabrication process significantly increase efficiency and reduce design and construction costs.

Australia’s 2050 net-zero goals require the design and construction sectors to manage resource depletion, reduce operational energy use, and to significantly reduce the embodied energy required to make buildings, combined with the national need to reduce housing construction costs.

The aim of this research is to develop and evaluate new forms of prefabricated building envelope systems derived from sheet formed engineered wood products. This process will establish and document structural alternatives to traditional forms of low-rise timber-framed construction. This approach recognises, translates, adapts, and builds on the learned experiences of other developed nations that have identified the need for the co-design of non-solid wood based advanced structural systems.  

This project will establish a new suite of methods to utilise existing sheet materials manufactured from lower-grade forest resources for the construction of low-rise buildings. This will provide better wood fibre utilisation and a new generation of design and construction typologies. 

FUNDED PROJECTS

  • GRANT
    Advanced structural systems for prefabricated residential building envelopes utilising engineered wood products sourced from low-grade forest resources
    1 Jul 2025 - 31 Jul 2028
    People funded by this grant:
    • Dewsbury M,
    • Burnham R,
    • Booth P,
    • Taoum A,
    • Haley P
    Project Total: $0; Current building regulatory frameworks for low-rise residential buildings favour the use of solid timber building techniques that originate from the 1830s and the traditional building approval systems innovation. These methods are increasingly unsustainable and inefficient. The development of refined low-rise timber fibre-based structural systems that incorporate modern prefabrication methods will lead to better construction efficiency and resource utilisation. The purpose of the research is to explore, develop and evaluate structural solutions for prefabricated residential building envelope construction systems that utilise engineered wood products derived from low-grade forest resources. As a component of Australias net-zero targets, this project has the potential to increase carbon sequestration, reduce embodied energy, improve building airtightness, and increase building envelope thermal efficiency. This will significantly reduce the need for the limited high-quality solid-wood resource, and through the redesign of the fabrication process significantly increase efficiency and reduce design and construction costs. Funded by: Department of Education - Grant; Valley Workshop; Campus Plus; University of Tasmania.
  • GRANT
    Project 2.1 - The bio-hygrothermal performance of mid-rise non-residential timber framed faade systems
    1 May 2025 - 31 Dec 2028
    People funded by this grant:
    • Dewsbury M,
    • Leardini P,
    • Gasparri E,
    • Sepulveda P,
    • Bejarano F
    Project Total: $194,437; This project aims to explore hygrothermal interactions for advanced wood-product-based mid-rise faade systems. This project will generate new knowledge regarding wood-product based faade system design that adequately manages inward and outward flows of energy and moisture. Knowledge will be generated via computer-based bio-hygrothermal simulation and observations from prototype constructions. Expected outcomes will include new methods to use plantation grown wood products within the faade system of mid-rise buildings in Australia. This will enhance Australias architectural, engineering, and construction capabilities to design low embodied energy mid-rise buildings and will significantly benefit the greater use of low-carbon intensive plantation wood products. Funded by: Australian Research Council - Grant-Industrial Transformation Research Hub; University of Queensland; University of Sydney; Aurecon Australia; University of Tasmania.
  • GRANT
    ARC Advance Timber Hub - Project 1.5 - Development of moisture monitoring, assessment and management systems for the Australian mass timber construction industry
    1 Jan 2025 - 31 Dec 2028
    People funded by this grant:
    • Shirmohammadi M,
    • Dewsbury M,
    • Gilbert B,
    • Leardini P,
    • Singh T
    Project Total: $170,835; This project aims to transform Australias timber and construction sectors by stimulating rapid growth in timber innovation and uptake of use of timber in buildings. It plans to enable this transformation by addressing the diverse elements required to motivate investment, stimulate innovation, satisfy stakeholder demands, define longterm social-environmental-economic benefits and establish a roadmap for change. The expected outcomes will kickstart the change process, supported by growth in advanced manufacturing across the value chain. This should provide significant benefits in stimulating an opportunity for regional development and resource diversification whilst helping the sectors transition to a circular and net-zero economy. Funded by: Australian Research Council - Grant-Industrial Transformation Research Hub; University of Queensland; University of Tasmania.
  • GRANT
    Advanced residential prefabricated envelope systems utilising engineered wood products sourced from lower grade forest resources: Hygrothermal
    1 Jul 2024 - 30 Jun 2031
    People funded by this grant:
    • Dewsbury M,
    • Sivret E,
    • Haley P,
    • French W
    Project Total: $0; Current building regulation frameworks and conventions have favoured the use of solid timber building techniques originating from the 1830s and stifled innovation. These methods are increasingly unsustainable and inefficient. The development of refined building envelope systems that address critical hygrothermal principles is essential for the provision of high-performance buildings that not only lead to better construction efficiency and resource utilisation but address the need for net zero and low carbon intensity durable and healthy buildings. The purpose of the research is to develop prefabricated residential construction systems that utilise engineered wood products derived from lower grade forest resources. This has the potential to increase carbon sequestration, reduce embodied energy, improve building airtightness, and increase envelope thermal efficiency. This will significantly reduce the need for the limited high quality solid wood resource, and through process design reduce costs through prefabrication system efficiencies. Funded by: Department of Education - Collaborative Grants Program; University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Hygrothermal risk analysis of southern Australian 7 Star residential wall systems (CBOS 4.1)
    15 Aug 2022 - 31 Jan 2027
    People funded by this grant:
    • Dewsbury M
    Project Total: $80,086; This project builds on previously funded hygrothermal research and delves into the hygrothermal implications that may exist for 7 Star residential envelope design and construction systems in southern Australia. Using transient hygrothermal simulation tools, the main focus of this research is about testing conditions and materials that may support surface and interstitial moisture, moisture accumulation and mould growth in new homes. Funded by: Department of Justice Tasmania ($80,086); University of Tasmania.
  • GRANT
    ARC Research Hub to Advance Timber for Australias Future Built Environment
    1 Jan 2022 - 31 Dec 2026
    People funded by this grant:
    • Crews K,
    • Dewsbury M,
    • Lindsay G
    Project Total: $2,959,803; The Hub aims to establish a robust value proposition for substantially increased use of timber for buildings in Australia. It plans to enable integrated transformation of the construction and timber production sectors, by addressing the diverse elements required to motivate investment, stimulate innovation, satisfy stakeholder demands, define long-term socio-enviro-economic benefits and establish a roadmap for change. The expected outcomes are interventions that kickstart the change process, supported by growth in advanced manufacturing across the value chain which future proof the construction sector against transition to a circular and net-zero economy, while stimulating an opportunity for regional development and resource diversification Funded by: Australian Research Council - Grant-Industrial Transformation Research Hub; University of Queensland; University of Tasmania ($15,000).
  • GRANT
    Transient hygrothermal and bio-hygrothermal risk analysis for housing in temperate and cool temperate Australia
    11 Oct 2021 - 12 Jan 2024
    People funded by this grant:
    • Dewsbury M
    Project Total: $169,500; This project builds on the knowledge base established at UTAS regarding the relationship between poorly developed building regulations and the increased occurrence of mould and condensation in new housing. This project will develop innovative simulation based guidance regarding moisture accumulation and mould growth risk mitigation strategies for the design and construction of external envelopes in new housing and apartments, located within National building regulation climate zones 4, 6 7 and 8. Funded by: Victorian Building Authority - Grant ($70,000); CSIRO-Commonwealth Scientific & Industrial Research Organisation ($59,500); Master Builders Association of Victoria ($40,000); University of Tasmania ($11,099).
  • GRANT
    Managing timbers moisture content in the supply chain, construction and in service
    1 Jul 2019 - 15 Jun 2022
    People funded by this grant:
    • Nolan G,
    • Dewsbury M,
    • Tolooiyan A
    Project Total: $276,500; The project aims to understand the moisture content (MC) of wood products and timber in the Australian timber supply chain and develop guidance that allows industry to limit unacceptable MC variation and improve customer confidence. Funded by: FWPA - National Institute for Forest Products Innovation - Grant-Research; University of Tasmania.
  • UTAS INTERNAL FUNDING
    Milestone Markers: identifying incoming student competencies in a new curriculum
    1 Jul 2019 - 30 Nov 2019
    People funded by this grant:
    • Power J,
    • Brunton R,
    • Dewsbury M,
    • Sawyer M,
    • Steen A
    Project Total: $3,402; Funded by: University of Tasmania; University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Effective low energy and healthy buildings for Tasmania
    1 Jan 2018 - 31 Dec 2021
    People funded by this grant:
    • Dewsbury M
    Project Total: $107,400; Provide new knowledge for cool temperate climate built fabric assemblage recommendations to enable water vapour pressure management within the building envelope Funded by: Department of Justice Tasmania ($107,400); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Empirical validation of vapour resistivity values for Australian construction materials
    1 Jan 2018 - 31 Dec 2021
    People funded by this grant:
    • Dewsbury M
    Project Total: $15,000; The measurement of Australian construction materials to establish vapour resistivity values Funded by: CSIRO-Commonwealth Scientific & Industrial Research Organisation ($15,000); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Condensation Risk Mitigation for Tasmanian Housing
    1 Jan 2017 - 30 Jun 2019
    People funded by this grant:
    • Dewsbury M,
    • Law T
    Project Total: $62,067; New research exploring condensation risks that might be present in contemporary construction and recommendations to minimise risk Funded by: Department of Justice Tasmania ($62,067); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Scoping study of condensation in residential buildings
    1 Jan 2016 - 31 Dec 2016
    People funded by this grant:
    • Dewsbury M,
    • Law T,
    • Clark J
    Project Total: $53,295; Assessment of information from government, industry and international collaborators to provide advice to government on directions that should be taken within Australia to address the matter of condensation within buildings. Funded by: Australian Building Codes Board ($53,295); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Reviewing the claimed performance of installed bulk insulation and faced bulk insulation in hot and mixed (hot daytime, cold night time) climates.
    1 Jan 2015 - 31 Dec 2016
    People funded by this grant:
    • Dewsbury M,
    • Law T,
    • Clark G,
    • Dunlop C,
    • Chandler T
    Project Total: $12,506; An assessment of the impact of insulation and heat storage for residential and non residential buildings in hot climates of Australia - UTAS component is the Literature review and report editing. Funded by: Exemplary Investment Pty Ltd ($12,506); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Investigation of Destructive Condensation in Australian Cool-temperate Buildings
    1 Jan 2014 - 30 Sep 2015
    People funded by this grant:
    • Dewsbury M,
    • Law T,
    • Henderson A,
    • Livingston,
    • Webster
    Project Total: $56,000; New empirical data will be obtained from buildings. Based on international literature, remediation action will be taken. New empirical data will measure the success of the remediation. The Tasmanian Government will publish the remediation methods as guidance for the design and construction professions. Funded by: Department of Justice Tasmania ($56,000); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Renovation Cost-Benefit Analysis
    1 Jan 2013 - 31 Dec 2014
    People funded by this grant:
    • Dewsbury M
    Project Total: $5,000; This project will develop heating and cooling data, and measure cost, comfort and financial gains for a range of energy efficiency measures in four (4) renovation case studies. Funded by: Exemplary Investment Pty Ltd ($5,000); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Simulated Temperatures in Shipping Container
    1 Jan 2013 - 31 Dec 2013
    People funded by this grant:
    • Law T,
    • Dewsbury M
    Project Total: $5,741; To assist in investigating an incident of hypothermia, the police from Hobart have requested for a report on the simulated temperatures of a shipping container based on weather data obtained from the Bureau of Meteorology. Funded by: Tasmania Police ($5,741); University of Tasmania.
  • GRANT
    Improving Thermal Efficiency in Lightweight Construction
    1 Jul 2012 - 30 Sep 2014
    People funded by this grant:
    • Dewsbury M
    Project Total: $103,500; Funded by: Forest & Wood Products Australia Limited - Grant-Research and Development ($98,500); CSIRO-Commonwealth Scientific & Industrial Research Organisation ($5,000); University of Tasmania ($20,000).