DoctorJason Ali-Lavroff

Senior Lecturer Mechanical Engineering

Engineering

  • Senior Lecturer Mechanical Engineering
    Engineering
  • +61 3 6226 2137 (Work)
  • +61 3 6226 7247 (Fax)
  • School of Engineering, Engineering, 213 Engineering Building, Sandy Bay Campus, TAS

RESEARCH SUMMARy

Dynamic impact loading of structures.
Transient vibratory response.
Fluid structure interaction (FSI) modelling.
Identification of dynamic wave induced slamming loads and bending moments.
Wave-piercer catamaran motions response and motions control.
High-speed ship resistance and propulsion.
FSAE research and development.

The aims of the research undertaken in collaboration with Incat are to: identify peak structural loads and motions response as well as predicting resistance to determine propulsion requirements. This work is undertaken to improve vessel performance through improvements in hull and structural design by undertaking research using model scale tests, full-scale analysis and CFD. Model scale tests are undertaken based on a hydroeleastic segmented model instrumented specifically to measure vertical bending moments, centre bow slam loads and motions response whilst simulating the vibration response of the full-scale vessel. The results from model scale tests are compared to measurements taken at full-scale during sea trials undertaken on Incat wave-piercer catamarans. The sea trials involve measurement of ship motions, structural loads and engine power to determine vessel performance. More recently sophisticated methods have been developed to predict the motions response, vessel loads and powering requirements using Computational Fluid Dynamics (CFD).

Awards

Thomas Hawkley Gold Medal, Institution of Mechanical Engineers (IMechE), 2026

W H C Nicholas Prize, Royal Institution of Naval Architects (RINA), 2020

Medal of Distinction, Royal Institution of Naval Architects (RINA), 2019
Vice Admiral E. L. Cochrane Award, Society of Naval Architects and Marine Engineers (SNAME), 2019

Confederation of Australian Motorsport (CAMS) Prize for Inspiring Motorsport, 2017

Confederation of Australian Motorsport (CAMS) Prize for Inspiring Motorsport, 2014

Medal of Distinction, Royal Institution of Naval Architects (RINA), 2013

FUNDED PROJECTS

  • CONSULTANCY/CONTRACT RESEARCH
    Enhancing Naval Hull Stress Monitoring with Neural Network-Based Data Imputation
    26 Mar 2025 - 26 Nov 2025
    People funded by this grant:
    • Ali-Lavroff J
    Project Total: $0; Modern naval vessels operate in harsh and unpredictable environments, enduring repeated cyclic loading due to wave induced forces throughout their service life. In addition to these cyclic stresses, factors such as wave slamming and prolonged exposure to corrosive marine conditions further accelerate fatigue damage. This degradation is particularly pronounced at welded joints, where stress concentrations and material discontinuities make them highly susceptible to fatigue failure. The cumulative effect of these factors can reduce the lifespan and operational availability of critical naval assets. [1,2,3] To better understand and mitigate issues such as fatigue-related damage and better inform through life management of ships, the Hull Monitoring System (HMS) was introduced to HMAS Maryborough in 2015 by the Defence Science and Technology group (DSTG). [1] HMS system collects data on the stresses and strains that a vessel experiences during service through the utilisation of a range of sensors distributed across the ship as illustrated by figure 1 in the appendix. The key advantage of the utilisation of HMS is it records the specific stresses encountered by an individual vessel through real-time continuous data collection rather than relying on generalised service life predictions. Generalised models cannot accurately account for all possible conditions, speeds, and operational scenarios a vessel may face. By utilising a HMS, all stresses experienced by the ship can be continuously recorded, enabling a more precise assessment of fatigue related damage and overall structural health. This enables proactive maintenance and providing confidence in structural integrity, ultimately extending the vessels service life and operational availability. [4] One major limitation in the use of a HMS for fatigue prediction is its heavy reliance on data quality, as demonstrated by [5]. Missing data due to system failures can introduce significant inaccuracies in fatigue assessments. A promising solution to this issue is the application of Machine Learning (ML) for missing data imputation. This approach has been successfully implemented in offshore wind turbine support structures, with a study published in Ocean Engineering showing that ML-based imputation achieved an average absolute error of 2.1% [6]. However, this study presents an opportunity to expand upon previous research by leveraging a significantly larger set of input parameters. By integrating HMS data with wave environment data from hindcast databases, the model can draw from a considerably broader range of variables than in [6], potentially enhancing both the accuracy and overall completeness of the generated model. While this method has proven effective for wind turbines, there has been no investigation to date into its effectiveness for naval vessels. This project will utilise data provided by the Defence Science and Technology Group (DSTG) from a decommissioned Armidale-class patrol boat (ACPB), ex-HMAS Maryborough. The vessel was equipped with a HMS, which have been used to inform structural life assessments of the ACPB fleet [1]. However, gaps in the data are present due to system failures in acquisition or recording throughout the ship's operational lifetime. These failures stem from issues such as full storage, high noise levels, and other technical errors. [8] References [1] S. Aksu, T. Magoga, and B. Riding, Analysis of HMAS GLENELGs O Funded by: Department of Defence; University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Ride Control Systems of high-speed catamarans
    1 Jan 2024 - 31 Dec 2025
    People funded by this grant:
    • Ali-Lavroff J,
    • Mehr J,
    • Holloway D
    Project Total: $8,000; The project will seek to determine the influence of ride control systems in head seas at model scale for reducing ship motions, ship loads and improving passenger comfort. Funded by: Incat Tasmania Pty Ltd ($8,000); University of Tasmania.
  • GRANT
    APR Internship
    18 Jan 2021 - 25 Jun 2021
    People funded by this grant:
    • Ali-Lavroff J
    Project Total: $20,500; Funded by: Australian Institute of Mathematics & Science Pty Ltd - APR Intern ($20,500); University of Tasmania.
  • GRANT
    Remote sensing to improve structural efficiency of high-speed catamarans
    1 Jan 2019 - 31 Jan 2023
    People funded by this grant:
    • Ali-Lavroff J,
    • Holloway D
    Project Total: $623,250; The project aims to develop a monitoring system to remotely measure ship motions, loads and ride control activity under commercial operations. Data will be analysed using advanced statistical methods to inform evidence-based design to improve the structural efficiency and passenger comfort. The work is significant as it will impact on design rules used worldwide, reducing weight and increasing payload and transport efficiency for this class of vessel. A 'Smart? semi-autonomous interface will be developed to provide on-board seakeeping guidance to the ship captain. This technology will lead the way for increasing ship safety, vessel longevity and improving passenger comfort for all types of vessels worldwide including high-speed catamarans. Funded by: Australian Research Council - Grant-Linkage Projects ($460,000); Incat Tasmania Pty Ltd ($163,250); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    UTAS Motorsport FSAE ELECTRIC
    1 Jan 2016 - 30 Mar 2024
    People funded by this grant:
    • Ali-Lavroff J
    Project Total: $250,500; Development of FSAE Race Car for the Australasian FSAE competition held on a yearly basis. The car is developed based on undergraduate teaching but also for undergraduate and postgraduate research. Funded by: COVA Group ($500); Donation via University of Tasmania Foundation ($235,000); Elphinstone Group ($15,000); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    Incat Catamaran Motions and Loads Research
    1 Jan 2014 - 30 Jun 2019
    People funded by this grant:
    • Ali-Lavroff J
    Project Total: $95,000; Funded by: Incat Tasmania Pty Ltd ($95,000); University of Tasmania.
  • CONSULTANCY/CONTRACT RESEARCH
    UTAS Motorsport FSAE Research
    1 Jan 2014 - 31 Dec 2029
    People funded by this grant:
    • Ali-Lavroff J
    Project Total: $49,650; This project involves the development of FSAE Race Car for the Australasian FSAE competition held on a yearly basis. The car is developed based on undergraduate teaching but also for undergraduate and postgraduate research. Research will be undertaken on vehicle suspension and chassis dynamic responses to improve performance as well as developing vehicle electronic technology to improve vehicle efficiency and driver control. Funded by: 3D Printing Systems ($5,200); DJ Motors Pty Ltd ($33,250); Elphinstone Group ($15,000); Donation via University of Tasmania Foundation ($8,600); Andrew Walter Constructions ($5,000); Hexagon Pty Ltd ($2,800); Transend ($1,000); Fairbrother Pty Ltd ($1,000); Saunders and Ward Pty Ltd ($500); Data Wise Consulting Pty Ltd ($300); Norske-Skog (Australasia) Pty Ltd ($200); Bennett's Petroleum Supplies Pty Ltd ($100); University of Tasmania.
  • GRANT
    Power and Propulsion Efficiency of High-Speed Catamaran Vessels
    1 Mar 2010 - 1 Sep 2011
    People funded by this grant:
    • Ali-Lavroff J
    Project Total: $10,057; Funded by: University of Tasmania - Grant-New Appointees Research Grant Scheme (NARGS); University of Tasmania ($10,057).